1
5 4 | 6, 1 |
7, 2 | 3 |
1
POWER | CD | TUNER | TAPE |
1 | 2 | 3 | FM/AM |
1 | 2 | 3 |
|
4 | 5 | 6 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | DISPLAY |
7 | 8 | 9 |
|
0 |
| +10 | SLEEP |
0CD/TUNER
PLAY/PAUSEAUX
| STOP | TIME | REPEAT |
| PROG | TAPE | EDIT RANDOM |
| MUSIC |
|
|
| LOCATION |
|
|
| USER |
|
|
|
|
| TAPE |
|
| DECK | |
|
| A | B |
|
|
| |
6, 1 | REC/ |
|
|
PAUSE |
| 7, 2 | |
|
|
| |
|
| VOLUME |
•When recording important selections, be sure to make a preliminary test to ensure that the desired source material is being properly recorded with good sound quality.
•The automatic recording level control circuit automatically controls the level of the input signal used for recording.
•Adjusting the VOLUME control and using the
•For the tape deck, the deck which can be used for recording is the DECK B only. When recording, be sure to load a tape into the DECK B cassette compartment.
Recording from the built-in tuner
1
2 Tune to the desired station. (Refer to the “TUNING OPERATION” on page 15 and 16.)
3 Load a tape into the DECK B cassette compartment.4 When recording with the Dolby NR system, press the Dolby B NR button so that the indicator over the button lights up. If not, set it off.
*For details on the Dolby noise reduction, refer to the “Dolby NR (Noise Reduction) system” on page 20.
5 Select the reverse mode “ | ” to record on only one | |
side, or “ | ” for continuous recording on both sides by |
*The indicator over the button will light up and the play direction indicators will flash.
7 Press the play button to record on side A, or the play button to record on side B.
*For continuous recording on both sides, begin on side A. Recording stops automatically at the end of side B.
To stop recording temporarily1 Press the REC/PAUSE button.2 To resume recording, press the play button whose indicator is flashing.To stop recording
Press the stop button.
English