Yamaha LSP - page 19

LS9 Editor Owner’s Manual

EMATRIX SEND

These bar graphs indicate the send levels of the signals sent from the

MIX channel to MATRIX 1–8 bus. You can also adjust the send lev-

els by dragging a bar graph to left or right. While you drag the bar

graph, the send level is shown in the numerical display area for

PAN/BALANCE (6).

You can set the minimum value (–∞ dB) by holding down the

<Ctrl>(< >) key of your computer keyboard and clicking the bar

graph, or set the nominal value (0.00 dB) by holding down the

<Ctrl>(< >) key and <Shift> key and clicking the bar graph.

The bar graph display will change as follows according to the send position (pre/post)

and on/off status of the signal sent from the MIX channel to the MATRIX buses.

To switch a send on/off, click the channel number located at the left of the bar graph.

FPAN/BALANCE

The PAN knob adjusts the panning of the signal that is sent from the mix channel to the

STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value

by holding down the <Ctrl>(< >) key of your computer keyboard and clicking this

knob. If assigned as a stereo bus, this adjusts the balance of the odd-numbered channel

and even-numbered channel. The stereo bus setting can be made in Mix Bus Setup of

the Mixer Setup screen.

The [ST] button is an on/off switch for the signal that is sent from the mix channel to

the STEREO bus.

The [MONO] button is an on/off switch for the signal that is sent from the mix channel

to the MONO bus.

If LCR MODE is selected in the Selected Channel window, the [LCR] button will

appear instead of the [ST] button and [MONO] button, and the [LCR] button will be

an on/off switch for the signal that is sent from the mix channel to the LCR bus.

GVARI/FIXED

Indicates the type (VARI or FIXED) of the currently selected MIX bus. This parameter

can be switched in Mix Bus Setup of the Mixer Setup screen.

HSEL (Select)

Selects the MIX channel for which you want to make settings.

ICUE

This button cue-monitors the signal of the MIX channel.

JON

Switches the MIX channel on/off.

KFader

Adjusts the output level of the

MIX channel. The current fader

value is shown in the numeric box

immediately below the fader. You

can set this to the minimum value

(–∞ dB) by holding down the

<Ctrl>(< >) key of your com-

puter keyboard and clicking the

fader knob, or set it to the nominal

value (0.00 dB) by holding down

the <Ctrl>(< >) key and <Shift>

key and clicking the fader knob.

The numbers and alphabetical letters at the right of the fader indicate the mute groups to

which that channel belongs, and show the Recall Safe and Mute Safe status of the channel.

LChannel number

Indicates the number of the MIX channel. You can double-click this number to open

the Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key

of your computer keyboard and double-click this, the Selected Channel window will

open as an additional view.

MChannel name

This is a text box that displays the channel name. You can also edit the channel name in

this text box.

The background color will be the same as the background color of the icon in the chan-

nel select area of the Selected Channel window.

• Pre/on (green))

• Pre/off (green)

• Post/on (yellow)

• Post/off (yellow)

The numbers of mute groups to

which this channel belongs are

shown in red.

If this channel is set to Recall Safe,

the R character is shown in green.

If this channel is set to Mute Safe,

the M character is shown in green.