Yamaha LSP If a MIX channel is selected

LS9 Editor Owner’s Manual

37

If a MIX channel is selected

❏CHANNEL SELECT (Channel selection)

ASELECT (Channel selection)

Except for the fact that your editing applies to a MIX channel, this is

the same as the channel selection for an input channel (➥ p.27).

BOUTPUT PATCH

This selects the output port that will be assigned to the MIX chan-

nel. (For the output ports that can be selected (➥ p.18).

If multiple patches have been made, only the ﬁrst port is shown.

If you change the patching in this window, the port that had been

assigned until then will be cancelled, and only the newly selected

port will be assigned.

❏TO MATRIX

AMATRIX send level

This adjusts the send level of the signal sent from the MIX channel to the MATRIX

buses.

BON (MATRIX send on/off)

This is an on/off switch for the signal sent from the MIX channel to the MATRIX bus.

CPOINT (Send point)

Select either PRE or POST as the position from which the signal is sent from the MIX

channel to the MATRIX bus. PRE POINT is selected if this is on, or POST FADER is

selected if this is off. The PRE POINT setting can be made in the Mixer Setup screen.

• If you are using MATRIX buses in stereo, the knob for the

odd-numbered bus will be PAN.

• The stereo/mono status can be speciﬁed in the Mixer

Setup screen.

1 2

2

1

3

HINT

Knob of odd-

numbered side

Contents

Main Special Notices Yamaha Pro Audio Global Site Contents Overview of LS9 Editor System Setup Conguring LS9 Editor Getting Started Mixer Setup Creating a user key H CH OPERATION CURRENT SCENE L FILE LOAD Working with Sessions Undo/Redo Function Window operations Synchronizing LS9 Editor Ofine Edit Function Basic operation of controllers Knobs Faders Numerical displays only Bar graphs CHANNEL SELECT SYNC Master window SCENE MEMORY Layer Keys Page INPUT CH window AInput patch BHA GAIN C48V Overview window 1 2 3 Page Page ST IN window Page MIX window Page MATRIX window Page STEREO/MONO window Page Custom Fader Layer window Custom Fader Layer window Custom Fader Layer ST IN window If an input channel is selected Selected Channel window Page MIX SEND HA GAIN//HPF TO STEREO/MONO MODE ST/MONO button LCR button EQUALIZER DYNAMICS1/2 Page Page Page INSERT (INPUT CH 132 only) DIRECT OUT (except for ST IN CH) RECALL SAFE/MUTE SAFE MUTE GROUP Fader If a MIX channel is selected TO MATRIX TO STEREO/MONO Here you can specify how the signal will be sent from the MIX channel to the STEREO bus / MONO bus. MODE ST/MONO button When this button is on, the signal will be sent to the STEREO bus and independently to the MONO bus. LCR button EQUALIZER Page If a MATRIX channel is selected FROM MIX, ST/MONO AFROM MIX, ST/MONO send level PRE/POST BON(FROM MIX, ST/MONO send on/off) Page Page Page Library window Page Page Patch Editor window INPUT PATCH page PRESET CLEAR ALL Page Page PATCH LIST page Page AMount BInput patch CModule graphic DInput meter/Output meter EOutput patch Rack module editor GEQ window CInput patch DInput meter 5 3 4 EOutput patch Page Page Page Page EXTERNAL HA page INPUT METER page Meter window OUTPUT METER page CUSTOM FADER LAYER METER page MUTE GROUP ASSIGN page Group/Link window CHANNEL LINK page Page SCENE MEMORY page Scene window Page Page RECALL SAFE page Page FADE TIME page Page Current User Edit User Select Channel ID CLEAR ALL Custom Fader Layer Setup window Current User Edit User Select Function name User Dened Keys Setup window Keyboard Shortcuts REV-X HALL/REV-X ROOM/REV-X PLATE Part Names and Functions AEFFECT NAME The effects name appears here. Appendix F[Room Size] G[Diffusion] H[HPF] I[LPF] J[Hi Ratio] Page Index B C D E