LS9 Editor Owner’s Manual
40
❏DYNAMICS1
Except for the fact that the available types are COMPRESSOR, EXPANDER, COMPAND H and COMPAND S,
and that you can select more than one signal as the key-in signal, this is the same as the dynamics for input chan-
nels (➥ p.32).
❏INSERT
Except for the fact that the insert points that can be selected are different, this is the same as for the insert settings
of an input channel (➥ p.35).
❏RECALL SAFE/MUTE SAFE
These are the same as the Recall Safe and Mute Safe functions for input channels.
❏MUTE GROUP
Selects the mute group (1–8) to which the MIX channel belongs.
❏Pan/Fader
AON
Switches the MIX channel on/off.
BFader
Adjusts the output level of the MIX channel. A meter indicating the signal level is
shown at the right of the fader, and the current value is shown in the numerical box
immediately below. You can set this to the minimum value (–∞ dB) by holding down
the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it
to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key
and clicking the fader knob.
CCUE
This button cue-monitors the signal of the MIX channel.
1
2
3