LS9 Editor Owner’s Manual
39
❏EQUALIZER
ALIBRARY
Accesses the OUTPUT EQ page of the LIBRARY window.
BON
Switches the EQ on/off.
CEQ graph
Indicates the response for the EQ of the currently selected channel. To reset the EQ to flat response, hold down
the <Ctrl>(< >) key of your computer keyboard and click the graph.
DQ
EFREQUENCY
FGAIN
These knobs adjust the Q, center frequency, and boost/cut amount for the four bands LOW, LO-MID, HI-MID,
and HIGH.
G HIGH shelving
If this button is on, the HIGH EQ will be switched to a shelving type (the Q knob of the HIGH EQ will disappear).
H LPF (Low Pass Filter)
If this button is on, the HIGH EQ will function as a low pass filter. The Q knob of the HIGH EQ will disappear,
and the GAIN knob will act as the low pass filter on/off switch.
I (LOW shelving)
If this button is on, the LOW EQ will be switched to a shelving type (the Q knob of the LOW EQ will disappear).
J HPF (High Pass Filter)
If this button is on, the LOW EQ will function as a high pass filter EQ. The Q knob of the LOW EQ will disappear,
and the GAIN knob will act as the high pass filter on/off switch.
KTYPE I/TYPE II (EQ type)
Selects either TYPE I (the algorithm used by previous digital mixers) or TYPE II (a newly developed algorithm) as
the EQ type.
LATT (Attenuation)
Adjusts the amount of attenuation/gain.
6
21
3
5
L
4
7
9
8
K
J