Yamaha LSP - page 58

LS9 Editor Owner’s Manual

ARack No. (Rack selection)

Here you can select the rack that you want to operate. Only

5–8 can be used with effect modules; 1–4 are only for GEQ

modules.

BBYPASS

This button temporarily bypasses the effect. Inactive when

using a GEQ module.

CCUE

This button cue-monitors the output of the currently selected

effect. Inactive when using a GEQ module.

DEFFECT NAME

Indicates the title of the currently selected effect.

EEFFECT TYPE

Indicates the currently selected effect type. You can also switch the effect type from this window. To do so, click

the text box, and select the desired effect type from the popup menu that appears.

FLIBRARY

This button accesses the effect library. Clicking this button will open the EFFECT page of the LIBRARY window.

GInput patch

Click the L CHANNEL or R CHANNEL area, and choose one of the

following as the signal route that will be patched to the L/R input chan-

nels of the internal effect.

(*) Selectable only for effect modules.

The channel name is shown in the boxes immediately below.

HInput meter

Indicates the level of the signal being input to the internal effect.

IOutput patch

Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be

patched to the L/R output channels of the internal effect.

(*1) INPUT CH 33–64 can be displayed only if you’re editing ofﬂine and have selected LS9-32 in the Model Select ﬁeld of the Mixer Setup

window, or if you are editing online with the LS9-32 connected.

(*2) Selectable only for effect modules.

The channel name is shown in the boxes immediately below.

NONE No assignment

MIX 1–16(*) MIX channel 1–16

MATRIX1–8(*) MATRIX channel 1–8

ST L, ST R, MONO(C)(*) STEREO channel L/R, MONO channel

INS CH 1–32 INPUT CH 1–32 insert in

INS MIX 1–16 MIX channel 1–16 insert in

INS MATRIX1–8 MATRIX channel 1–8 insert in

INS ST L, INS ST R, INS

MONO(C)

Insert-in of STEREO channel L/R or the MONO

channel

NONE No assignment

CH 1–64(*1)(*2) INPUT CH 1–64(*1)

STIN1L–STIN4R(*2) ST IN CH 1–4 (L/R)

INS CH 1–32 INPUT CH 1–32 insert out

INS MIX 1–16 MIX channel 1–16 insert out

MATRIX INSERT1–8 MATRIX channel 1–8 insert out

INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel

21 3