LS9 Editor Owner’s Manual
74
The Custom Fader Layer allows you to freely combine the LS9’s internal channels in a custom layer for each user
level. The Custom Fader Layer Setup window lets you edit these Custom Fader Layer settings.
CH 17–32 and ST IN 3/4 are displayed only if you’re editing offline and have selected LS9-32 in the Model
Select field of the Mixer Setup window, or if you are editing online with the LS9-32 connected.

❏Current User

This shows the name of the current user of the LS9 console. In the initial state in which the Editor has never been
synchronized with the LS9 console, this will be Administrator. In LS9 Editor, operations can always be performed
with Administrator privileges, and the Administrator's settings will always be saved in the user authentication key.

❏Edit User Select

Select the user level that will be displayed and edited in the Custom Fader Layer Setup window.
In the initial state, you can select either Administrator or Guest.
If the Editor is synchronized with an LS9 console that is authenticated with a user authentication key saved on a USB
storage device, then you can select either Administrator, Guest, or Ext.User.
The Overview window shows the settings of the current user.
Only the settings for Administrator and Guest are saved in the session file.

❏Channel ID

Here you can select the channels that will be assigned to the channel strip of the Custom Fader Layer.

❏CLEAR ALL

This returns the settings to an initialized state in which nothing has been assigned.
Custom Fader Layer Setup window
NOTE
NOTE
NOTE