UP
DN
E
EMU01331
Power Trim/Tilt Switch
The power trim/tilt adjusts the motor angle in relation to the transom. The power trim/tilt switch is located on the remote control lever grip. Pushing the switch “UP” trims the motor up, then tilts the motor up. Pressing the switch “DN”
701034* tilts the motor down and trims the motor down. When the switch button is
released, the motor will stop in its current position.
NOTE:
Refer to the sections “ADJUSTING TRIM ANGLE” and “TILTING UP/DOWN” in Chapter 3 for instructions on usage.
EMU01155
Throttle Friction Adjusting Screw
A friction device in the remote control box provides adjustable resistance to movement of the remote control lever, and can be set according to operator preference. An adjusting screw is located on the front of the remote control box.
Resistance | Screw |
Increase | Turn clockwise |
Decrease | Turn counterclockwise |
w
Do not overtighten the friction adjusting screw. If there is too much resistance, it may be difficult to move the lever, which could result in an accident.
701035