E
102011
OPEN
CLOSE
214011
EMU00434
ENGINE FAILS TO OPERATE
EMU00955*
Cold Engine Fails to Start
If a cold engine fails to start for prime start model, use the following procedure.
w
When starting or operating the engine, do not touch the ignition coil, high voltage wire, spark plug cap or other electrical parts carrying high voltage. Keep loose clothing and other objects away from the engine when starting it with an emergency starter rope. An unguarded rotating flywheel is very dangerous. Do not attempt to replace the top cowling when the engine is running. Proceed at once to the nearest port to get the engine repaired. Take care to prevent water splashing onto the flywheel.
1)Adjust the trim angle so that the drive shaft is at right angles to the water surface or is trimmed in.
2)Open the emergency starter valve located behind the silencer cover on the front side.
3)Squeeze the priming pump two or three times to feed fuel.
902025