E
EMD04011*
TRIM TAB
The trim tab should be adjusted so that the steering control can be turned to either the right or left by
applying the same amount of force.
w
An improperly adjusted trim tab may cause difficult steering. Always test run after the trim tab has been installed or replaced to be sure steering is correct. Be sure you have tightened the bolt after adjusting the trim tab.
A1 Trim tab
|
|
|
|
|
| 2 Bolt |
|
q |
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
| Boat tends to veer | The rear end of trim tab |
|
|
| B |
|
|
|
|
|
|
|
|
| To the left | Turn the left(port side), | |
| w |
| |||||
|
| (port side) | “A” in the figure | ||||
603011 |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| To the right | Turn the right |
|
|
|
|
| |||
|
|
|
|
|
| (starboard side) | (starboard side), |
|
|
|
|
|
|
| “B” in the figure |
|
|
|
|
|
|
|
|
cC
The trim tab also serves as an anode to protect the engine from electroche mical corrosion.
Never paint the trim tab as it will become ineffective as an anode.
EMU01297
TRIM ANGLE ADJUSTING ROD
The position of the trim angle adjusting rod determines the minimum trim angle of the outboard motor in relation to the transom.
404011