E
EMU01329
REPLACING FUSE
If the fuse has blown on an Electric start model, open the fuse holder and replace the fuse with a new one of proper amper- age.
w
Be sure to use the specified fuse. An incorrect fuse or a piece of wire may allow excessive current flow. This could cause electrical system damage and a fire hazard.
| NOTE: | |
q | If the new fuse blows again immediately, | |
consult a Yamaha dealer. | ||
w | ||
|
1 Fuse holder
2 Fuse (20A)
205015
EMK78010
CHECKING WIRING AND
CONNECTORS
1) Check that each grounding wire is properly secured.
2) Check that each connector is engaged securely.
EXHAUST LEAKAGE
Start the engine and check that no exhaust leaks from the joints between the exhaust cover, cylinder head and crank case.
WATER LEAKAGE
Start the engine and check that no water leaks from the joints between the exhaust cover, cylinder head and crank case.