SET MENU ITEMS

12 DYNAMIC RANGE

Use this feature to adjust the dynamic range. This setting is effective only when this unit decodes Dolby Digital signals.

12 DYNAMIC RANGE

≥SP:“MAX STD MIN HP:“MAX STD MIN

Choices:

 

MAX, STD, MIN

 

Initial setting:

MAX (for both speakers and headphones)

level

 

MAX

STD:

Select the “STD” (Standard) setting for general use.

Output

 

 

MAX:

Select the “MAX” setting for feature films.

Dialog level

STD

MIN:

Select the “MIN” setting for listening to sources at

 

MIN

 

extremely low volume levels.

MIN

STD

MAX

Input level

Caution

•Some types of the Dolby Digital software do not support “MIN” for the dynamic range. If “MIN” is selected to play this type of software, the volume may be extremely lowered. If this problem occurs, select “MAX” or “STD”.

13 SP DELAY

Use this feature to adjust the delay of the center and the rear center channel sounds. This feature works when there is sound output from the center speakers, with a source like Dolby Digital or DTS, etc.

13 SP DELAY

≥UNIT…………………feet MAIN L/R…10.0ft CENTER………10.0ft REAR L/R…10.0ft REAR CT………7.0ft

Center speaker image

C

L C R

RL

RC

RR

 

RC

 

Ideally, the center speaker and the rear center speaker should be the same distance from the main listening position as the left and right main speakers. However, in most home situations, the center speaker or the rear center speaker is placed in line with the main speakers or the rear speakers. By delaying the sound from the center speaker and the rear center speaker, the apparent distance from the center speaker and the rear center speaker to the main listening position can be adjusted to make it seem the same as the distance between the left and right main speaker, and the left and right rear speakers to the listening position. Adjusting the delay time for the center speaker is especially important for giving depth to the dialogue.

1 Tap or to select “UNIT”.

2 Tap or to select the unit to be used for setting.

Select one from “msec”, “meters”, and “feet”.

Notes

•Setting items change depending on the unit chosen.

•When “meters” or “feet” is selected, enter the distance from your listening position to each speaker.

3 Tap or to select the speaker for which the delay is adjusted. 4 Tap or to set the delay.

Tap for higher value and for lower value.

Rear center speaker image

E-66