Yamaha pmn ■Setting timers, ■Editing timers, ■Organizing timers into groups, E-87

REMOTE CONTROL FEATURES

Setting timers

With a timer you can activate a component at the time you determine.

■Setting timers

To activate a component at a desired time, you can use the timer.

1	Tap .
2	Open the Macro menu and select a timer group.
3	Switch to the Edit mode via	at the bottom of the
	touch screen.
	Empty timer buttons appear in the TIMER control panel.
4	Tap the button for which you want to set a timer.
	The first TIMER control panel appears, enabling you to set the

start time.

5 Enter the command the timer should execute and tap

.

A timer can contain either a single IR command or a macro. You can navigate to any control panel you want, just as you do in the Use mode.

6 Tap the clock button and set the start time using the left/right buttons.

7 Tap one or more day buttons to select or deselect days for the timer.

You can choose to repeat the timer weekly.

8 Scroll down to display the second TIMER control panel, in which you can set the stop time.

9 Enter the command the timer should execute and tap

.

10 Set the stop time and select the days following the same procedure described in steps 6 and 7.

11 Tap the clock button to deselect it and press the left button (labeled “CLOSE”) to close the timer.

A confirmation screen appears, enabling you to save or cancel the timer.

12 Tap .

The timer is activated.

Note

•The timer works only when the remote control’s sending eye is pointed at the controlled component and no obstructions interfere with the IR signal.

■Editing timers

You can edit any timer you have set.

1	Open the timer group that contains the timer.
2	Switch to the Edit mode via	at the bottom of the
	touch screen.
3	Tap the timer you want to edit.

The contents of the timer appear.

4 Edit the timer.

5 Press the left button to close the timer.

A confirmation screen appears, enabling you save or cancel the timer.

6 Tap .

The timer is edited.

■Organizing timers into groups

You can create as many timer groups as you like. Each group can contain up to 25 timers.

1 Open any timer group.

2 Switch to the Add mode via at the bottom of the touch screen.

You can create a new group, copy an existing group, or restore a previously-deleted group.

• : You add a new group in which you can record new macros.

• : You copy a group and its macros and use the copy to create new macros.

• : You restore a deleted group and reuse the macros.

3 Tap .

You see a touch screen on which you can create and edit timer groups. The new group is added to the Macro menu.

OPERATION ADVANCED

English

E-87