REMOTE CONTROL FEATURES

Adding and moving

■Adding a component

If you have a component that is not listed in the Device menu, you can add it to the remote control.

You cannot add components to the Home menu directly. You must add them via the Device menu.

1 Make sure the device tab is active.

The device tab is active when the name of a component is displayed.

2 Switch to the Add mode via at the bottom of the touch screen.

The remote control displays the following choices:

• : Choose this option to add a completely new component.

• : Choose this option to copy a component already listed in the Device menu (for example for a second DVD).

• : Use this option to restore a component you have deleted.

3 Tap the component you want to add in the Device menu.

Note

•If the component you want to add is not listed, choose a similar one. You can customize it later.

The remote control allows you to add new components with or without RC codes.

• : Choose this option if you think the new component understands RC codes. The new component is added with operational buttons.

• : If you choose this option, the new component is added without operational buttons. You will then have to program them as explained in “Learning control panel buttons”.

You cannot define a component in the Brand mode, because there are no RC codes available.

4 Tap the button of your choice.

The new component is automatically displayed in the Use mode.

Note

■Moving a component, macro group or timer

group

You can change the order in the Device menu and the Macro menu. Changes you make in the Device menu are automatically updated in the Home menu.

1 Make sure the device tab or macro tab is active.

The device or macro tab is active when the name of a compo- nent, macro or timer is displayed.

2 Switch to the Move mode via at the bottom of the touch screen.

The remote control displays the menu.

3 Tap the component or group you want to move.

The menu item is highlighted.

4 Use the left and right button to move the menu item up or down.

5 Tap to save the changes.

You return to the Use mode.

Note

•The item at the top of the device tab corresponds to on the first Home menu panel. If you move the RECEIVER tab down, it

is advisable to label

with the name of the item at the top of

the Device menu.

 

•A new device tab is automatically created in the Device menu and in the third Home menu panel. However, you cannot add the button of the new component to the audio/visual source panels.

E-82