Yamaha PSR-8000 - page 138

138
■PANEL CONTROL...................................................................
The parameters in this display page assign specific PSR-8000
panel controls to notes. The assigned notes then control the
corresponding panel control operations when received via a
MIDI channel which is set to the PANEL CONTROL receive
mode in the RECEIVE display, above.
● OCTAVE
Use either the ▲ and ▼ LCD buttons to the left of the
display, or the OCT LCD dial to select the octave in which you
want to assign a note. The selected octave appears between the
▲ and ▼ LCD buttons to the left of the display. The “C” note
in octave “3” corresponds to C3 (middle C) on the keyboard.
● NOTE
Use the NOTE LCD dial to select the note to which you want
to assign a panel control function.
● TYPE SELECT
Use the TYPE SELECT LCD dials to assign a panel control
function to the selected note.
• All panel control functions other than those listed
below function in the same way as the corresponding
panel control or footswitch.
• 17. HARMONY/ECHO: HARMONY/ECHO is on
only while the assigned key is held.
• 23. F.CHORD1/2: The assigned key alternately
switches between the FINGERED CHORD 1 and
FINGERED CHORD 2 AUTO ACCOMPANIMENT
fingering modes.
• 24. BASS HOLD: BASS HOLD is on only while the
assigned key is held.
• 25/26. PERCUSSION1/PERCUSSION2: The per-
cussion instrument assigned to FOOTSWITCH 1/2
will sound when the assigned key is played.
• 27. ACMP BREAK: The AUTO ACCOMPANIMENT
is halted while the assigned key is pressed.
The PSR-8000 “Functions”