57

E2:EG

AMP RATE (Amplitude Envelope Rate)................................................................................................................................

These parameters set the rate of output level variation. Higher

values produce faster variation.

These parameters set the amplitude envelope output level.

AMP LEVEL (Amplitude Envelope Level)...........................................................................................................................
INITIAL Sets the initial level of the envelope.
DECAY1, Set the levels after DECAY1 and DECAY2
variation.
DECAY2
ATTAC K Sets the rate of variation from key-on to the
maximum attack level.
DECAY1 Set the rate of variation between the maximum
attack level and the levels set by the AMP LEVEL
DECAY1 and DECAY2 parameters and the final
level, respectively.
RELEASE Sets the rate of variation from the level at key-
release to level 0 when SUSTAIN is off.
SUSTAIN Sets the rate of variation from the level at key-
release to level 0 when SUSTAIN is on.
DECAY2,
DECAY3
The RESET LCD button resets the currently selected EG parameters to their most basic settings.
Custom Voice Creator
* Higher rate values produce faster variation.
ATTACK
RATE DECAY1 RATE
DECAY1 LEVEL
LEVEL
DECAY2
LEVEL
RELEASE
LEVEL
SUSTAIN
LEVEL
KEY ON KEY OFF
DECAY2 RATE DECAY3 RATE RELEASE RATE
SUSTAIN RATE
TIME
INITIAL
LEVEL