13

11

10 12

10Adjust the BALANCE control so that the test tone sound output level of the left front speaker and the right front speaker are the same.

BALANCE

0

l l

22

33

4

4

L 5

5 R

11Adjust the test tone sound output level of the center speaker to be at the same level as that of the main speakers with the CENTER LEVEL keys. (Dolby test)

LEVEL

CENTER

12Adjust the sound output level of the rear speakers to be at the same level as that of the main speakers with the REAR LEVEL keys. (Dolby test)

LEVEL

REAR

Notes:

If the center channel mode is in the “PHANTOM” position, the sound output level of the center speaker cannot be adjusted. This is because in this mode, the center sound is automatically output from the left and right front speakers.

When the FRONT MIX switch is set to 5ch, front level adjustment cannot be executed from the front panel or from the REMOTE CONTROL TRANSMITTER.

You cannot adjust the front level when the LD/TV switch is set to 5CH DISCRT mode.

If you press the LEVEL +/– switch without previously pressing the FRONT, CENTER, or REAR switch, the last channel selected will be changed.

CHAPTER/CH

DISPLAY STOP

VCR 1

+

 

PRO LOGIC

ENHANCED

70mm

TV

VCR 2

 

MOVIE THEATER

THEATER

 

1

2

3

4

 

 

 

SURROUND

 

 

V–AUX

 

SPORTS

STADIUM

ROCK

JAZZ CLUB

13

5

6

7

8

 

CHURCH

HALL

 

EFFECT

MASTER

9

10

DSP

ON/OFF

VOLUME

 

 

 

 

FRONT LEVEL

TIME

 

 

11

+

 

+

 

+

+

 

 

CENTER LEVEL

 

TEST

 

 

 

 

DELAY

 

 

12

REAR LEVEL

 

MUTING

 

+

 

RESET

CLEAR

 

 

 

14

13 Adjust the test tone sound output level of the front speakers to be at the same level as that of the main speakers with the FRONT LEVEL keys. (DSP test)

LEVEL

FRONT

14 Cancel the test tone.

TEST

PRO LOGIC

The previous mode is selected.

Notes:

Once you have completed these adjustments, you can adjust whole sound level on your audio system by using the VOLUME control (or the MASTER VOLUME keys on the remote control transmitter).

If you use external power amplifiers, their volume controls may also need to be adjusted to achieve the proper balance.

If there is insufficient sound output from the center and rear speakers, you may decrease the main speaker output level by setting the MAIN LEVEL switch on the rear panel to “–10 dB”.

18