2
1
1 Select the source to be recorded.
REC OUT
SOURCE | TAPE 1 |
LD/TV | |
VCR 1 | TUNER |
VCR 2 | CD |
VIDEO AUX | PHONO |
2 Play the source and press the corresponding input selector, then turn the VOLUME control up to confirm the input source. (For detailed information on the tuning operations, refer to page 22.)
|
|
|
|
| VOLUME | |
TAPE 2 |
|
|
| 20 | l8 l6 l4 | |
MONITOR TAPE 1 TUNER | CD | PHONO | l2 | |||
24 | l0 | |||||
|
|
|
| |||
|
|
|
| 28 | 8 | |
VIDEO AUX VCR 2 | VCR 1 | LD/TV | 34 | 6 | ||
40 | 4 | |||||
|
|
|
| |||
|
|
|
| 50 | 3 | |
|
|
|
| 60 | 2 | |
|
|
|
| 70 | l | |
|
|
|
|
| 0 | |
|
|
|
|
|
3 Set the tape deck or VCR to the recording mode.
4 To monitor a source selected by the REC OUT selector, press the corresponding input selector button.
Notes:
•When the REC OUT selector is set to “SOURCE”, the source selected by the input selector buttons is output through the TAPE
•When the REC OUT selector is set to something other than “SOURCE” and you press an input selector button other than the one you pressed in step 2, the recording source will not be changed and you can enjoy another source while recording.
•To record from tape deck 2, set the REC OUT selector to SOURCE, and press the TAPE 2/MONITOR input selector.
•If the tape deck connected to the TAPE 2 REC OUT terminal has
•DSP, VOLUME, BASS, TREBLE and BALANCE control settings have no effect on the material being recorded.
•Signals connected to the 5CH DISCRT INPUT are not output to the tape decks or video recorders.
To record the signals from an LD player, you must connect the player to the LD/TV terminals.
•It is possible for someone in the second room to use the Room 2 Remote transmitter to change the source you selected for recording. For example, if you are recording a program from the tuner and the person in the second room changes the station. If you are listening to another source, you may not discover this error until you playback the recording.
20