Yamaha RX-V2090 Adjustment of the FRONT LEVEL, Adjustment of the CENTER LEVEL, Adjustment of the REAR LEVEL, Note:, Note:, REAR LEVEL, FRONT LEVEL, CENTER LEVEL

The following adjustments can be done on the remote control transmitter as well as on the front panel.

Adjustment of the FRONT LEVEL

You can “fine-tune” the sound output level of the front effects speakers after setting the output level according to the instructions in “Speaker balance adjustment” on page 16.

LEVEL

FRONT

Press the “+” or “–” FRONT LEVEL key on the remote control transmitter. As you change the volume level, the front panel LCD will display the value. If you press the “+” or “–” key continuously, the level will continuously change except for a momentary pause at the preset point (80).

•Once the output level is adjusted, the level value will be the same in all the digital sound field programs.

Note:

When 5 CH DISCRT or DOLBY PRO LOGIC is used, the FRONT LEVEL control will not function.

Adjustment of the CENTER LEVEL

You can adjust the sound output level of the center channel speaker even if the output level is already set in “Speaker balance adjustment” on page 16.

LEVEL

CENTER

Press the “+” or “–” CENTER LEVEL key on the remote control transmitter. As you change the volume level, the front panel LCD will display the value. If you press the “+” or “–” key continuously, the level will continuously change except for a momentary pause at the preset point (80).

•The center channel speaker is used only in DOLBY PRO LOGIC, DOLBY PRO LOGIC ENHANCED, 70 mm MOVIE THEATER, TV THEATER, SPORTS and 5 CH DISCRT modes.

•Once the output level is adjusted, the level value will be the same in all the digital sound field programs.

Note:

If the digital sound field program STADIUM, ROCK CONCERT, JAZZ CLUB, CHURCH, or CONCERT HALL is selected, the CENTER LEVEL control will not function.

Adjustment of the REAR LEVEL

You can adjust the sound output level of the rear speakers even if the output level is already set in “Speaker balance adjustment” on page 16.

•Once the output level is adjusted, the level value will be the same in all the digital sound field programs.

LEVEL

REAR

Press the “+” or “–” REAR LEVEL key on the remote control transmitter, the level value changes continu- ously. However, the value stops changing momentarily at the preset point (80).