Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha RX-V2090 SETTING THE SLEEP TIMER, To set the SLEEP time, To cancel the selected SLEEP time

1 40

Download 40 pages, 871.37 Kb

SETTING THE SLEEP TIMER

If you use the SLEEP timer of this unit, you can make this unit turn off automatically. When you are going to sleep while enjoying a broadcast or other desired input source, this timer function is helpful.

Notes:

•The SLEEP timer can be controlled only with the remote control transmitter.

•The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear panel of this unit.

To set the SLEEP time

1

SLEEP

SLEEP

Flashes continuously.

Whenever the SLEEP key is pressed, the SLEEP time will change as follows:

(Minutes)

The SLEEPtimer is OFF. (The indication before the SLEEP key is pressed.)

After a while, the display returns to the indication before the SLEEP timer is set, and the “SLEEP” indicator stops flashing and lights up.

2 The unit will be turned off automatically at the selected SLEEP time.

To cancel the selected SLEEP time

1

SLEEP

Press the SLEEP key until “SLEEP OFF” appears on the display.

SLEEP

SLEEP

Press once or more so that the display returns to the indication before the SLEEP timer is set. (“SLEEP” will go off from the display.)

Note:

The SLEEP timer setting can also be canceled by turning off the power with the POWER switch or disconnecting the power plug of this unit from the AC outlet.

31

Contents

Natural Sound Stereo Receiver OWNER’S MANUAL Contents SAFETY INSTRUCTIONS CAUTION: READ THIS BEFORE OPERATING YOUR UNIT FCC INFORMATION We Want You Listening For A Lifetime SUPPLIED ACCESSORIES Features OPEN/CLOSE THE CONTROL DOOR PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP Directional Enhancement Circuit + DSP SPEAKER SETUP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION Seven-SpeakerConfiguration Five-SpeakerConfiguration SPEAKER PLACEMENT CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING SPEAKERS ABOUT THE ACCESSORY TERMINALS 1LOW PASS terminal 2CENTER OUTPUT terminal 3FRONT OUTPUT terminals 4REAR OUTPUT terminals 5MAINÊ CH — MAINÊ IN terminals 6MAINÊ CH — PREÊ OUT terminals 7MAIN LEVEL switch 8ROOM 2 OUT — AUDIO PRE OUT, VIDEO OUT terminals 9REMOTE CONTROL — IN, OUT terminals CONNECTING SÊ VIDEO TERMINALS ON SCREEN DISPLAY CONNECTING TO VIDEO AUX TERMINALS (FRONT PANEL) CONNECTING TO ROOM 2 EQUIPMENT Using the Remote Transmitters ANTENNA CONNECTIONS ADJUSTMENT BEFORE OPERATION SPEAKER BALANCE ADJUSTMENT Seven and five speaker configuration Six and Four speaker configuration Page BASIC OPERATIONS To play a source To record a source to tape (or dub from tape to tape) Selecting the SPEAKERS system Using the TONE BYPASS switch Adjusting the BALANCE control Adjusting the BASS and TREBLE controls Using the BASS EXTENSION switch TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING PRESET TUNING Manual Preset Tuning To program stations To recall a preset station Automatic Preset Tuning Exchanging Preset Stations USING THE DIGITAL SOUND FIELD PROCESSOR (DSP) Description of Each Sound Field Program Description of Dolby Pro Logic Surround To play a source with the digital sound field processor Dolby Surround AC-3 Adjustment of the FRONT LEVEL Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL Adjustment of DELAY TIME SETTING THE SLEEP TIMER To set the SLEEP time To cancel the selected SLEEP time REMOTE CONTROL TRANSMITTER Battery installation Battery replacement STANDBY mode (Singapore model only) For Control of This Unit For Other Component Control REMOTE CONTROL “LEARNING” FUNCTION To learn a new function To clear a learned function To clear all learned functions Troubleshooting guide TROUBLESHOOTING SPECIFICATIONS