Case C: “I want to listen to a music program from the FM radio station...”

Press FSCENE 4 (or

ESCENE 4) to select “Radio Listening”.

Notes

•To use the “Radio Listening” template, you must tune into the desired radio station in advance. See pages 34 to 36 for tuning information.

•To achieve the best possible reception, orient the connected AM loop antenna, or adjust the position of the end of the indoor FM antenna.

y

If you cannot find the desired situation, you can select and change the assigned SCENE template for the SCENE buttons. See page 23 for details.

■After using this unit...

Press 1STANDBY/ON on the front panel to set this unit to the standby mode.

Quick start guide

What do you want to do with this unit?

■Customizing the SCENE templates

• Using various SCENE templates

☞ P. 23

■Using various input sources

• Basic controls of this unit

☞ P. 27

• Enjoying FM/AM radio programs

☞ P. 34

•Enjoying XM Satellite Radio programs

☞P. 37

■Using various sound features

• Using various sound field programs

☞ P. 31

INTRODUCTION

This unit is set to the standby mode. In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. To turn on this unit from the standby mode, press 1STANDBY/ ON (or L POWER) on the front panel. See page 18 for details.

Note

In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control.

■Adjusting the parameters of this unit

•Optimizing the speaker parameters for your listening room (BASIC SETUP)

☞P. 21

•Manually adjusting various parameters of this unit

☞P. 43

•Setting the remote control

☞P. 51

•Adjusts the advanced parameters

☞P. 55

■Additional features

Automatically turning off this unit

☞ P. 30

English

9 En