Automatic preset tuning

You can use the automatic preset tuning feature to store FM stations with strong signals up to 40 (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) of those stations in order. You can then recall any preset station easily by selecting the preset station number.

1Press DINPUT l/ hrepeatedly so that “TUNER” is displayed in the front panel display.

2Press 3FM/AM to select “FM” as the reception band.

3Press and hold 6MEMORY for more than 3 seconds.

The preset station number as well as the MEMORY and AUTO indicators flashes. After approximately 5 seconds, automatic presetting starts from the current frequency and proceeds toward the higher frequencies.

Flash

AUTOMEMORY

A1:FM 87.50MHz

Flashes

When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station.

y

You can select the preset station group and the preset station number where the first received station will be stored by pressing

4A/B/C/D/E and then 5PRESET/TUNING/CH l/ h.

Notes

Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number.

Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune into it manually and store it as described in “Manual preset tuning” on this page.

FM/AM tuning

Manual preset tuning

You can also store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) manually.

1Tune into a station automatically or manually.

See page 34 for tuning instructions.

2Press 6MEMORY.

The MEMORY indicator flashes in the front panel display for approximately 10 seconds.

3Press 4A/B/C/D/E and 5PRESET/ TUNING/CH l/ hrepeatedly to select a

preset station group (A1 to E8) while the MEMORY indicator is flashing.

Check that the colon (:) appears in the front panel display.

Flashes

TUNED MEMORY

C3:AM 630 kHz

Preset station number

4Press 6MEMORY while the MEMORY indicator is flashing.

The station band and frequency appear in the front panel display with the preset station group and number you have selected.

TUNED

C3:AM 630 kHz

The displayed station has been stored as C3.

Notes

Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number.

The reception mode (stereo or monaural) is stored along with the station frequency.

OPERATION

BASIC

 

 

English

35 En