Playback

Caution

Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS.

Basic operations

1Turn on the video monitor connected to this unit.

2Press 9SPEAKERS repeatedly to select the front speakers you want to use.

The respective speaker indicators lights up in the front panel display.

3Press DINPUT l/ hrepeatedly (or press one of the input selector buttons (C)) to

select the desired input source.

The name of the currently selected input source appears in the front panel display for a few seconds.

Available input source

DVR V-AUX DTV/CBL DVD MD/CD-R TUNER CD XM

INPUT:DVD

Currently selected input source

4Start playback on the selected component or select a broadcast station.

Refer to the operating instructions for the source component.

See page 34 for details about FM/AM tuning instructions.

See page 37 for details about XM Satellite Radio tuning instructions.

5Rotate 8VOLUME (or press Q VOLUME +/

) to adjust the volume to the desired output level.

6Press APROGRAM l/ h(or press D AMP and then press I PROG l/ h) repeatedly to

select the desired sound field program.

The name of the selected sound field program appears in the front panel display.

See page 31 for details about sound field programs.

Movie Dramatic

Currently selected

surround field program

Notes

Choose a sound field program based on your listening preference, not merely on the name of the program.

When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 28).

When PCM signals with a sampling frequency higher than 48 kHz are input, this unit is automatically set to the “STRAIGHT” mode (see page 33).

To display information about the currently selected input source in the front panel display, see page 30 for details.

Guide to contents

When you want to...

See

page

 

 

 

Adjust the tonal quality of the front speakers

29

 

 

Edit parameters of sound field programs

32

 

 

Enjoy the sources which have wide dynamic range at

28

night

 

 

 

Use headphones

28

 

 

Select a decoder to play back sources with

32

 

 

Set this unit to the standby mode automatically

30

 

 

OPERATION

BASIC

 

 

English

27 En