Selecting the SCENE templates
Creating your original SCENE templatesYou can create your original SCENE templates for each SCENE button. You can refer to the preset 13 SCENE templates to create the original SCENE templates.
■Customizing the preset SCENE
templates
Use this feature to customize the preset SCENE templates.
Select the desired SCENE | Create an original SCENE | |
template | template | |
|
|
|
|
|
|
SCENE template library
(Image)
1
Assign the SCENE
template to the SCENE
button
2 Press G k/ nto select the desired parameter of the SCENE template and then G l/ hto select the desired value of the selected parameter.
You can adjust the following parameters for a SCENE template:
• The input source component
• The active sound field programs or STRAIGHT mode
• The night listening mode setting (see page 28) − SYSTEM: Keeps the current night listening
mode.
− CINEMA: Sets the night listening mode to the CINEMA mode.
− MUSIC: Sets the night listening mode to the MUSIC mode.
3 Press the E SCENE button again to confirm the edit.
1 
y
An asterisk mark (*) appears by the name of the original SCENE template.
1Press and hold the desired E SCENE button for 3 seconds and then press D AMP.
The SCENE template customizing screen appears on the front panel display.
1 | AMP |
3 seconds
Note
When the SCENE template you want to customize is not assigned to any of the E SCENE button, press G l/ h repeatedly to recall the desired SCENE template (see page 23).
Notes
•After changing the assignment of the SCENE template to the E SCENE buttons, you may need to set the input source of the
SCENE template on the remote control. See page 51 for details.
•You can create a customized SCENE template for each E SCENE button, and if you create another customized
SCENE template, this unit overwrites the old customized SCENE template with the new one.
•The customized SCENE template is only available for the assigned E SCENE button.