Basic setup

7Press G nto select “SET” and then G l/ h to select the desired setting.

SET >CANCEL

Choices: SET, CANCEL

Select “SET” to apply the settings you made.

Select “CANCEL” to cancel the setup procedure without making any changes.

y

You can also press P MENU to cancel the setup procedure.

8Press G ENTER to confirm your selection.

If you selected “SET” in step 7, each speaker outputs a test tone twice in turn. “CHECK:TestTone” appears in the front panel display for a few seconds and then “CHECK OK?” appears in the front panel display.

CHECK:TestTone

y

Check the speaker connections (see page 5) and adjust the “SPEAKERS” settings back in step 6, if necessary.

The indicator of the speaker currently outputting the test tone flashes in the front panel display.

9Press G l/ hto select the desired setting.

CHECK OK? ..YES

Choices: YES, NO

Select “YES” to complete the setup procedure if the test tone levels from each speaker were satisfactory.

Select “NO” to proceed to the speaker level adjustment menu to balance the output level of each speaker.

10Press G ENTER to confirm your selection.

If you selected “YES” in step 9, the setup procedure is completed and the display returns to the top set menu display.

If you selected “NO” in step 9, the front speaker level adjustment display appears in the front panel display.

11Press G k/ nto select a speaker and then G l/ hto adjust the balance.

The selected speaker and the front left speaker (or the surround left speaker) output a test tone in turn.

Press hto increase the value.

Press lto decrease the value.

FR --------

Select “FR” to adjust the balance between the front left and right speakers.

Select “C” to adjust the balance between the front left and center speakers.

Select “SL” to adjust the balance between the front left and surround left speakers.

Select “SR” to adjust the balance between the surround left and surround right speakers.

Select “SW” to adjust the balance between the front left speaker and the subwoofer.

Note

The available speaker channels differ depending on the setting of the speakers.

12Press P MENU to exit from “BASIC SETUP”.

22 En