Playback

Displaying the signal information

You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal.

1Press D AMP and then press P MENU on the remote control.

“BASIC SETUP” appears in the front panel display.

;BASIC SETUP

2Press G k/ nrepeatedly to select “SIGNAL

INFO” and then press G ENTER.

3Press G k/ nto switch the displayed information.

The following information about the input source appears in the front panel display.

Display

Description

FORMAT

Signal format.

 

 

 

The number of samples per second taken

SAMPL.

from a continuous signal to make a discrete

 

signal.

 

 

CH

The number of source channels in the input

signal (front/surround/LFE).

 

 

 

B.RATE

The number of bits passing a given point

per second.

 

 

 

 

Flag data encoded in DTS, Dolby Digital,

FLAG

or PCM signals that cue this unit to

 

automatically switch decoders.

 

 

4Press P MENU to exit.

Using the sleep timer

Use this feature to automatically set this unit to the standby mode after a certain amount of time.

Press D AMP and then press O SLEEP repeatedly to set the amount of time.

Each time you press O SLEEP, the front panel display changes as shown below.

SLEEP

120min

SLEEP 90min

SLEEP OFF

SLEEP

30min

SLEEP 60min

The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.

y

To cancel the sleep timer, press O SLEEP on the remote control repeatedly until “SLEEP OFF” appears in the front panel display.

You can also cancel the sleep timer setting by pressing

1STANDBY/ON (or M STANDBY) to set this unit to the standby mode.

Playing video sources in the

background

You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor.

Press the input selector buttons on the remote control to select a video source and then an audio source.

MULTI CH IN

CD MD/CD-R TUNER

Audio sources

DVD DTV/CBL DVR

Video sources

V-AUX XM

30 En