Set menu
■Audio settings G)AUDIO SET
Use this feature to adjust the overall audio settings of this unit.
Mute type MUTE TYP.
Use this feature to adjust how much the mute function reduces the output volume (see page 28).
Choices: FULL,
•Select “FULL” to completely mute all the audio output.
•Select
Audio delay A.DELAY
Use this feature to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.
Control range: 0 to 160 ms
Control step: 1 ms
Maximum volume MAX VOL.
Use this feature to set the maximum volume level in the main zone. This feature is useful to avoid the unexpected loud sound by mistake. For example, the original volume range is 16 dB to
Control range: 16 dB, 10 dB to
Control step: 5 dB
Note
The “MAX VOL.” setting takes priority over the “Initial Volume” setting. For example, if “INI VOL.” is set to
Initial volume INI VOL.
Use this feature to set the volume level when the power of this unit is turned on.
Choices: Off,
Control step: 1 dB
Note
The “MAX VOL.” setting takes priority over the “INI VOL.” setting.
Use this menu to reassign the input jacks, select the input mode or rename the input source.
■Input assignment
A)INPUT ASSIGN
Use this feature to assign the input jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components.
Once the input jacks are reassigned, you can select the corresponding component by using DINPUT l/ h(or the input selector buttons (C) on the remote control).
For COAXIAL INPUT jacks 1
IN (1)
Choices: (1) CD,
DVR
For OPTICAL INPUT jacks 2 and 3
IN (2)
IN (3)
Choices: (2) CD,
DVR
(3)CD,
DVR
Note
You cannot select a specific item more than once.