TUNING OPERATIONS

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).

AUTOMATIC TUNING

 

MANUAL TUNING

 

1. Select “TUNER” as the input source.

1. Select “TUNER” as the input source.

Front panel

 

Remote control

Front panel

Remote control

TUNER

PHONO

or

TUNER

TUNER

PHONO

TUNER

 

or

 

 

 

 

 

2.Select the reception band (FM or AM) confirming it on the display panel.

Front panel

FM or AM

FM/AM

2.Select the reception band (FM or AM) confirming it on the display panel.

Front panel

FM

or AM

FM/AM

 

3.If “AUTO TUNING” is not illuminated on the display panel, press once so that it lights up.

Front panel

AUTO/MAN’L MONO

AUTO TUNING

TUNING

MODE

4. Begin the automatic tuning search.

To tune to a higher frequency, press the right side once. To tune to a lower frequency, press the left side once.

Front panel

DOWN TUNING UP

•If the station where tuning search stops is not the desired one, press again.

•If the tuning search does not stop at the desired station (because the signals of the station are weak), change to the MANUAL TUNING method.

3. If “AUTO TUNING” is illuminated on the display panel, press once so that it goes off.

Front panel

AUTO/MAN’L MONO

TUNING

MODE

4. Tune to a desired station manually.

To continue tuning search, press and hold the button. Front panel

DOWN TUNING UP

NOTE

If you tune to an FM station manually, it is received in monaural mode automatically to increase the signal quality.

50