DEFFECT ON/OFF key
Switches on/off the digital sound field processor (including the Dolby Pro Logic Surround Decoder or the Dolby Digital
EInput selector keys Selects input source.
FA/B/C indicators
The position (A, B or C) selected by the A/B/C switch is shown in red.
GA/B/C switch
This switch must be used only when the lid of the remote control unit is open. (This switch will not function when the lid is closed.) Normally, set this switch to the “A” position. When controlling a Yamaha LD player by using the CD/LD player keys (2), set this switch to the “C” position.
HTRANSMIT/LEARN indicator
Lights up when the remote control unit is transmitting infrared signals (when a command key is pressed).
ILIGHT key
If this key is pressed, some of the keys on the remote control unit light up for about 5 seconds. If this key is pressed while those keys are lighting up, they stop lighting.
NOTE
When using the keys to control Yamaha components, identify them with your component’s keys. If these keys are identical, their functions will be the same. For each key function, refer to the corresponding instruction in your component’s manual.
LEARNING NEW CONTROL FUNCTIONS (When the lid is open)
This is a learning remote control unit. The shaded keys in the illustration shown right can be programmed to “learn” control functions from other remote control units. By learning
*See pages 73 to 74 for the learning method.
*See pages 76 to 77 for clearing a learned function (or all learned functions).
NOTE
If the memory capacity of the remote control unit becomes full, no further learning is possible even if some
64