RESET button

*For the remote control unit for the main room only

After you insert batteries (or you exchange batteries with new ones), press the RESET button before using the remote control

unit.

Notes about the Remote Control Unit

When you notice that remote control operation has become erratic, or the distance from which the remote control will function has decreased, it’s time to replace the batteries. Always replace all batteries at the same time.

This remote control uses an advanced, highly directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit when operating.

Open/close the control door

Remote control transmitter operation range

When it is not necessary to operate controls inside the control door, close the door.

To open the door

Remote control sensor

Within approximately 6 m (19.7 feet)

30°

30°

To close the door

Notes

There should be no large obstacles between the remote control

unit and the main unit.

If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control unit to work incorrectly. In this case, reposition the main unit to avoid direct lighting.

4