LEARNING A NEW FUNCTION
1Place this remote control unit and the other remote control unit so that they face each other.
This remote control unit
Other remote control unit
About
2Press the LEARN button using the point of a mechanical pencil etc.
TRANSMIT
/LEARN
CLEAR LEARN MACRO
Flashes slowly.
*If there is no operation for about 30 seconds after the LEARN button is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step.
3If necessary, select the memory area by using the A/B/C switch on the side panel of the remote control unit.
4Press the key on this remote control unit in which you will store a new function.
Lights up.
*If a key which cannot learn another function is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step.
*If there is no operation for about 30 seconds after a key is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is restored. If this occurs, restart from step 2.
English
73