AUTOMATIC PRESET TUNING

You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on page 51.

To store stations

1. Select the FM band.

Front panel

FM

FM/AM

2. Press and hold the MEMORY button for about 3 seconds.

Front panel

MAN’L/AUTO FM

PRESET

 

MEMORY

MEMORY

 

 

Flashes.

 

AUTO TUNING

3.To tune to higher frequencies, press right side once. To tune to lower frequencies, press left side once.

Front panel

DOWN TUNING UP

*If the TUNING button is not pressed, in a while, the automatic preset tuning begins automatically toward higher frequencies.

The automatic preset tuning begins from the frequency currently displayed. Received stations are programmed to A1, A2

... A8 sequentially.

*If more than 8 stations are received, they are also programmed to the preset station numbers on other groups (B, C, D and E) in that order.

If you want to store the first station received by the automatic preset tuning to a desired preset station number.

If, for example, you want to store the first received station to C5, select “C5” by using the A/B/C/D/E switch and the preset station number selector buttons after pressing the MEMORY button in step 2. Then press the TUNING button. The first received station is stored to C5, and next stations to C6, C7 ... sequentially.

If stations are stored up to E8, the automatic preset tuning is finished automatically.

When the automatic preset tuning is finished

The display shows the frequency of the last preset station.

Check the contents and the number of preset stations by following the procedure of the section “To recall a preset station” on page 51.

To recall a preset station

Simply follow the procedure of the section “To recall a preset station” on page 51.

52