PRO LOGIC

ADJUSTING DELAY TIME AND EACH SPEAKER OUTPUT LEVEL

English

In using the digital sound field processor including the Dolby Pro Logic Decoder or the Dolby Digital (AC-3) Decoder, you can adjust

Whenever pressed, the selection changes as follows.

delay time between the main sound and effect sound, and each speaker output level as you prefer.

NOTE: These adjustments can be made only when the effect

sound is on. If DSP and/or DIGITAL (or ) is not illuminated on the display panel, press the EFFECT switch on the front panel or the EFFECT ON/OFF key on the remote control unit so that at least one of those indicators lights up on the display panel.

1.If you will use the remote control unit, set the TIME/LEVEL·SET MENU switch to the TIME/LEVEL position on the remote control unit. NOTE: Be sure to use the remote control unit with the lid open.

D E L A Y T I M E

C E N T E R L E V E L

RS U R . L E V E L

L S U R . L E V E L

F R O N T L E V E L

S W F R L E V E L

(Delay time)

(Center speaker output level)

(Right rear speaker output level)

(Left rear speaker output level)

(Front effect speaker output level) (Subwoofer output level)

Remote control

TIME/LEVEL

SET MENU

2.Press once or more until the name of item on which you will make an adjustment appears on the display panel.

Front panel

Remote control

DELAY/C/

or

/F/SWFR

 

*Depending on a mode of this unit, the number of selections is reduced.

*Pressing the key on the remote control unit changes the selection in the reverse order.

3.Adjust its level.

Front panel

Remote control

or

4. Repeat step 2 and 3 to make adjustments on other items.

59