E

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Procedure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1) Remove the top cowling.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2)

Remove the flywheel cover by removing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the bolts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3) Prepare the engine for starting. See

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STARTING ENGINE for procedures. Be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

sure the engine is in Neutral and that

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the lanyard is attached to the engine

208036

 

 

stop switch. The main switch must be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF START OFF

 

START

 

8In this case, choke switch will not oper-

 

 

 

 

 

 

 

 

ON

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF ON START

 

 

 

 

 

 

 

 

 

ate. Pull out the choke knob when engine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is cold.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8Without setting the main switch to ON, it

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

is impossible to start the engine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4)

To start the engine with the emergency

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

starter rope, insert the knotted end of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the rope into the notch in the flywheel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rotor and wind the rope several turns

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

clockwise. Then, give a strong pull

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

straight out to crank the engine. Repeat

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

if necessary.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

w

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not install the top cowling when

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

engine is running.

 

 

 

 

 

 

 

 

 

 

 

 

208041

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5-7