E
EML20010
CHANGING GEAR OILw
Never get under the lower unit while it is tilted, even when the tilt- support lever is locked. Severe injury could occur if the outboard accidentally falls.
1)Put the outboard in a vertical position (not tilted).
w
Be sure the outboard is securely fastened to the transom or a stable stand. You could be severely injured if the outboard falls on you.
|
|
|
|
|
| 2) | Place a suitable container under the | |
|
|
|
|
|
|
| gearcase. | |
|
|
|
|
|
| 3) | Remove the oil drain plug. | |
|
|
|
|
|
| NOTE: |
| |
|
|
|
|
|
| |||
|
|
|
|
|
| The oil drain plug is magnetic. Remove all | ||
|
|
| q |
| metal particles from the plug before rein- | |||
|
|
| ||||||
|
|
|
|
|
| stalling it. | ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
| 4) | Remove the oil level plug to allow the oil | |
|
|
|
| w |
|
| to drain completely. | |
|
|
|
|
| ||||
|
|
|
|
|
| 1 | ||
| 601031 |
| 2 | Oil | ||||
|
|
|
|
|
|
|
|
|
cC
Inspect the used oil after it has been drained. If the oil is milky, water is getting into the gearcase which can cause gear damage. Consult a Yamaha dealer for repair of the lower unit seals.
NOTE:
For disposal of used oil consult your Yama- ha dealer.