E
5) With the outboard motor in an vertical position, using a flexible or pressurized filling device, inject outboard motor hypoid gear oil (SAE 90) into the oil drain plug hole.
Gear oil capacity:
Refer to “SPECIFICATIONS”, Page
601033
6) When oil begins to flow out of the oil level plug hole, insert and tighten the oil level plug.
7) Insert and tighten in the oil drain plug.
EML24010
INSPECTING AND REPLACINGANODEYamaha outboard motor is protected from corrosion by sacrificial anode.
Check the anode periodically. Remove the scales from surfaces of the anode.
603024 For the replacement of the anode, consult a Yamaha dealer.
cC
Do not paint the anode, for this would render it ineffective.
405016