E
UP
DOWNEMU01125
| POWER TRIM/TILT SWITCH | ||
| The power trim/tilt adjusts the motor | ||
| angle in relation to the transom. The | ||
| power trim/tilt switch is located on the | ||
| side of the bottom engine cowling. Push- | ||
| ing the switch “UP” trims the motor up, | ||
| then tilts the motor up. Pressing the | ||
302012 | switch “DN” tilts the motor down and | ||
| trims the motor down. When the switch | ||
| button is released, the motor will stop in | ||
| its current position. | ||
| w |
| |
| Use the power trim/tilt switch located on | ||
| the bottom engine cowling only when | ||
| the boat is at a complete stop with the | ||
| engine off. Attempting to use the cowl- | ||
| |||
| the boat is moving could increase the risk | ||
| of falling overboard and could distract | ||
| the operator, increasing the risk of colli- | ||
| sion with another boat or an obstacle. | ||
|
|
| |
| NOTE: |
| |
| Refer to the section “Adjusting Trim | ||
| Angle” and “Tilting Up/Down” for instruc- | ||
| tions on usage. | ||
|
|
|
|