|
|
|
|
|
| E |
|
|
|
| 2) | Align the three cowling hooks with the | |
| V4 |
| ||||
|
|
|
| locks on the bottom cowling. | ||
|
|
|
|
|
| |
|
|
| 3) | Press down on the top of the cowling at | ||
|
|
|
|
|
| the front and both sides of the back until |
|
|
|
|
|
| the three locks click. |
|
|
| 4) | To make sure the cowling is locked | ||
|
|
|
|
|
| properly push the cowling from each |
|
|
|
|
|
| side. If it lifts, repeat step 3. |
211013 cC
Make sure the cowling lock connection cable is operating correctly before reinstalling the top cowling.
8When the release lever is operated, both front and rear cowling hooks should be released at the same time.
If not, adjust the cable adjuster for the rear clamps.
8Make sure the cable operates smoothly and is free of corrosion.
8Check that the cable is properly secured in the holder.
8When reinstalling the cowling, insure that both the front and rear locks have operated properly.
If the cowling has not been locked properly some parts may be damaged by the top cowling shaking during operation.
q
000825
EMU01146
FLUSHING DEVICEThis device 1 is used to clean the cooling water passages of the motor using a garden hose and tap water.
NOTE:
Refer to “Cleaning