Optimizing the speaker setting for your listening room (YPAO)

When an error message is displayed during measurement

Select “Retry” or “Exit” using nCursor l/ h and then press nENTER.

ERROR

.E-9:USER CANCEL Don'toperate

any function

>RetryExit

[p]/[]:Select

[ENTER]:Return

Retry

Performs “Auto Setup” again.

Exit

Terminates the measurement and “Auto Setup.”

y

•See page 51 for details on error messages.

•When “E-5:NOISY” appears, you can continue measurement. To continue measurement, select “Proceed.” However, we recommend that you solve the problem first and then perform measurement again.

When a warning message is displayed after measurement

If a problem occurs during measurement, “WARNING” is displayed on the result display screen. Check the error and solve the problems.

WARNING

W-1:OUTOFPHASE

Reversechannel

FL---

CENTER

SL---

SBL---



[ENTER]:Return

y

•See page 52 for details on warning messages.

•Optimization will not be performed while a warning message is displayed. We recommend that you solve the problem and perform “Auto Setup” again.

1Check if “→” is displayed on the left of “WARNING” and press nENTER.

Details of the warning message are displayed. If there are multiple warning messages, you can display the next message using nCursor h.

2To return to the top result display, press nENTER again.

20 En