Yamaha V565 01:Empty, 01:FM92.5MHz, 29 En, Registering stations by manual station preset, Calling a preset station (Preset tuning), Clearing the preset station

During the automatic station preset, the upper area of the screen changes as follows: READY → SEARCH

→MEMORY each time a station is registered.

When registration is complete, “FINISH” appears and the option menu screen automatically reappears. When you press mOPTION on the remote control, the screen returns to the original state.

Registering stations by manual station preset

You can manually register AM stations or FM stations with weak signals.

1Tune in to a station referring to “Tuning in to the desired FM/AM station (Frequency tuning)” (see page 28).

2Press DMEMORY (or hMEMORY).

“Manual Preset” appears on the front panel display, followed soon by the preset number to which the station will be registered.

y

•By pressing down DMEMORY (or hMEMORY) for more than 2 seconds, you can skip step 3 and register the preset number to be one higher than the last preset number.

3Press EPRESET l/ h(or hPRESET k/ n) on the remote control to select the preset number to which the station will be registered.

When you select a preset number to which no station is registered, “Empty” appears on the display. When you select a registered preset number, a registered frequency is displayed on the right of the preset number.

New registered frequency

01:Empty

Flashing	Empty (or frequency that is currently
Preset	registered to the preset number)
number

y

•You can select a preset number using the sNumeric keys.

4Press DMEMORY (or hMEMORY) again to register.

When registration is complete, the screen returns to the original state.

To end the operation, press mOPTION. y

•To cancel registration, press nRETURN on the remote control or leave the tuner without any operations for about 30 seconds.

FM/AM tuning

Calling a preset station (Preset tuning)

You can call preset stations registered by automatic station preset or manual station preset.

Press EPRESET l/ h(or hPRESET k/ n) to select a preset number.

y

•Preset numbers to which no stations are registered will be skipped.

•When “No Presets” or “No Presets in Memory” is displayed it means that no stations are registered. See page 28 and register stations.

•You can directly select a preset number by pressing a sNumeric keys while calling a preset station. “Empty” appears on the display if you enter a preset number to which no station is registered. “Wrong Num.” appears if you enter an invalid number.

Clearing the preset station

1Press NINPUT l/ hrepeatedly (or press gTUNER) to switch the input source to “TUNER.”

2Press mOPTION on the remote control.

The option menu screen for setting options of tuner input appears on the front panel display.

3Display “Clear Preset” using the nCursor k / nand press nENTER.

The following screen appears on the display.

01:FM92.5MHz

Preset number of the registered station you want to clear.

y

•You can cancel the operation and return to the option menu screen by pressing nRETURN on the remote control.

4Select the preset number of the registered station you want to clear using the nCursor k/ nand press nENTER.

The preset station registered to the selected preset number is cleared. To clear the registration of multiple preset numbers, repeat the above steps. To end the operation, press mOPTION.

OPERATION BASIC

English

29 En