BASIC OPERATION

Playback
Basic procedure
1Turn on external components (TV, DVD player, etc.) connected to this unit.2Press NINPUT l/ h(or gInput selection keys) to select an input source.

The name of the selected input source is displayed for a few seconds.

Input source name

VOL.

AV1

y

•You can change the input source name displayed on the front panel display or the OSD on the video monitor as necessary (see

page 43).

3Play the external component that you have selected as the source input, or select a radio station on the tuner.

Refer to the operating instructions of the external component for details on playback. For selecting radio stations or playback of an iPod or Bluetooth component using this unit, see the following.

•FM/AM radio tuning (see page 28)

•Bluetooth component playback (see page 32)

•iPod playback (see page 30)

4Turn the PVOLUME control to adjust the volume (or press oVOLUME +/–).

Volume

VOL.

SW

Volume-18.5dB L C R

SL SR

Note

When you play back a DTS-CD, noise may be output in some conditions, which may cause a speaker malfunction. Make sure that the volume is set to low before starting playback. If noise is output, do the following.

1) When only noise is output

If a DTS bitstream signal is not properly input to this unit, only noise is output. Connect the playback component to this unit by digital connection and play back the DTS-CD. If the condition is not improved, the problem may results from the playback component. Consult the manufacturer of the playback component.

2)When noise is output during playback or skip operation Before playing back the DTS-CD, display the option menu after selecting the input source and set “Decoder Mode” to “DTS” (see page 33).

Using the SCENE function

This unit has a SCENE function that allows you to change input sources and sound field programs with one key. Four scenes are available for different usages, such as playing movies or music. The following input sources and sound field programs are provided as the initial factory settings.

 

Input source

Sound field program

 

 

 

BD/DVD

HDMI 1

Straight

 

 

 

TV

AV 1

Straight

 

 

 

CD

AV 3

Straight

 

 

 

RADIO

TUNER

7ch Enhancer

 

 

 

y

•When this unit is on standby, you can turn on this unit by pressing the SCENE key.

Selecting a SCENEPress ISCENE (or kSCENE).Registering input source/sound field program

Select the desired input source/sound field program, and pressing down ISCENE (or kSCENE) until “SET Complete” appears on the front panel display.

While display in the OPTION menu or SETUP menu, “SCENE Setting Complete” appears on the video monitor (OSD).

Switching remotely controlled external components linked to scene selections

You can operate an external component with the remote control of this unit by setting a remote control code for the external component for each input source. Setting remote control codes for desired input sources allows you to switch between external components linked to scene selections.

1Register the remote control code of an external component to the desired input source (see page 44).

Note

•Remote control codes cannot be registered to TUNER input.

OPERATION

BASIC

 

 

English

21 En