Operating various settings for this unit (Setup menu)

LFE channel signals

Parameter

Subwoofer

Front

Other

speakers

speakers

 

 

 

 

 

 

Both

Output

Not output

Not output

 

 

 

 

SWFR

Output

Not output

Not output

 

 

 

 

Front

Not output

Output

Not output

 

 

 

 

Low-frequency components of other channel signals

Parameter

Subwoofer

Front

Other

speakers

speakers

 

 

 

 

 

 

Both

[1]

[2]

[3]

 

 

 

 

SWFR

[4]

[3]

[3]

 

 

 

 

Front

Not output

[1]

[3]

 

 

 

 

[1]Outputs low-frequency components of the front left and right channels and the channel of speaker, the size of which is set to “Small.”

[2]Outputs low-frequency components of the front left and right channels.

[3]Outputs low frequency components when the sizes of speakers are set to “Large.”

[4]Outputs low-frequency components of the channel of speaker, the size of which is set to “Small.”

Front SP

Choices: Small/Large*

Sets the sizes of front left and right speakers.

Small Select this when small speakers are connected. Low-frequency components of the front left and right channels are output from a subwoofer.

Large Select this when large speakers are connected.

Note

•When “LFE/Bass Out” is set to “Front,” you can only select “Large.” If “LFE/Bass Out” is changed to “Front,” “Front SP” automatically switches to “Large” even when it is set to “Small.”

Center SP

Choices: None/Small*/Large

Sets the size of center speaker.

None Select this when no center speaker is connected. Center channel signals are spread to front left and right speakers.

Small Select this when a small center speaker is connected. Low-frequency components of center channel are output from a subwoofer. If a subwoofer is not connected they are output from front speakers.

Large Select this when a large center speaker is connected.

Sur. L/R SP

Choices: None/Small*/Large

Sets sizes of left and right surround speakers.

None Select this when no surround speakers are connected. Surround channel signals are spread to front left and right speakers. “Sur.B L/R SP” automatically switches to “None” when this is selected.

Small Select this when small surround speakers are connected. Low-frequency components of surround channels are output from a subwoofer. If a subwoofer is not connected they are output from front speakers.

Large Select this when large surround speakers are connected.

y

•When “None” is selected, the sound field programs automatically enter the Virtual CINEMA DSP mode.

Sur.B L/R SP

Choices: None/SMLx1/SMLx2*/LRGx1/LRGx2

Sets sizes of left and right surround back speakers.

None Select this when no surround back speaker are connected. Surround back channel signals are output from the surround L/R speakers and subwoofer. If the subwoofer is disabled, they are output from the surround L/R speakers and front speakers.

SMLx1 Select this when one small surround back speaker is connected.

SMLx2 Select this when two small surround back speakers are connected.

LRGx1 Select this when one large surround back speaker is connected.

LRGx2 Select this when two large surround back speakers are connected.

y

•When “None” is selected, “PLIIx Movie” or “PLIIx Music” cannot be selected.

Crossover Freq.

Choices: 40Hz/60Hz/80Hz*/90Hz/100Hz/110Hz/120Hz/ 160Hz/200Hz

Sets the lower limit of the low frequency component output from a speaker with a size set to “Small (SMLx1/ SMLx2).” Sound with a frequency below that limit is output from a subwoofer or front speakers.

If your subwoofer has a volume control or a crossover frequency control, set the volume to half or the crossover frequency at the maximum.

Subwoofer Phase

Choices: Normal*/Reverse

Sets the phase of your subwoofer if bass sounds are lacking or unclear.

Normal Select this not to change the phase of your subwoofer.

Reverse Select this to reverse the phase of your subwoofer.

40 En