■B)Level
Adjustable range:
Defaults: “FR.L/FR.R/SWFR” 0dB* “CNTR/SUR.L/SUR.R/SBL/SBR”
Separately adjusts volume of each speaker so that the sounds form speakers are at the same volume at the listening position. Items to be displayed vary depending on the number of speakers connected.
y
•When only one surround back speaker is connected, “SB” appears instead of “SBL” and “SBR.”
•You can adjust the volume listening to test tones when you set “Test Tone” to “On” (see page 41).
•If your subwoofer has a volume control or a crossover frequency control, set the volume to half or the crossover frequency at the maximum.
■C)Distance
Adjusts timing at which each speaker outputs sound so that sounds from speakers reach the listening position at the same time. Set unit (Unit) first and set the distance of each speaker.
Unit
Choices: meters (m)/feet (ft)*
meters (m) Displays the speaker distance in meters. feet (ft) Displays the speaker distance in feet.
Front L / Front R / Center / Sur. L / Sur. R / Sur.B L / Sur.B R / SWFR
Adjustable range: 0.30m to 24.00m (1.0ft to 80.0ft)
Defaults: 3.00m (10.0ft) “Front L/Front R/ SWFR”
2.60m (8.5ft) “Center”
2.40m (8.0ft) “Sur. L/Sur. R/ Sur.B L/Sur.B R”
y
•Different items are displayed depending on settings of “A)Config” (see page 39).
•When only one surround back speaker is connected, “Sur.B” appears instead of “Sur.B L” and “Sur.B R.”
■D)Equalizer
Adjusts sound quality and tone using a parametric graphic equalizer.
EQ Type Select
Choices: Auto PEQ/GEQ*/Off
Select an equalizer type.
Auto PEQ | Uses a parametric equalizer selected in |
| “Auto Setup.” Characteristics of the |
| currently used parametric equalizer (see |
| page 18) are displayed below “Auto PEQ.” |
GEQ | Uses a graphic equalizer. Press nENTER |
| to adjust the characteristics of the graphic |
| equalizer. |
Off | Not use a graphic equalizer. |
Operating various settings for this unit (Setup menu)
GEQ
Choices: 63Hz/160Hz/400Hz/1kHz/2.5kHz/
6.3kHz/16kHz
Adjustable range:
Adjusts sound quality of each speaker using a graphic equalizer. The graphic equalizer of this unit can adjust signal levels in 7 frequency ranges.
To adjust the signal level in each range, select the desired speaker with nCursor l/ hwhile “→” is displayed next to “Channel,” then select the desired frequency band with nCursor k/ n, and adjust the signal level with nCursor l/ h.
■E)Test Tone
Choices: Off*/On
Switches between on and off of an oscillator that generates test tones. To turn on the oscillator, select “On” using nCursor l/ h. When “On” is selected, you can adjust the settings of “2 Manual Setup” while listening to a test tone.
Off | Not generate test tones. |
On | Generates test tones. |
Sound Setup
You can set various items for sound outputs.
■1 Dynamic Range
Choices: Min/Auto/STD/Max*
Selects the dynamic range adjustment method for reproducing bitstream signals.
Min/Auto | (Min) Sets the dynamic range suitable for |
| low volume or a quiet environment, such as |
| at night, for bitstream signals except for |
| Dolby TrueHD signals. |
| (Auto) Adjusts the dynamic range for Dolby |
| TrueHD signals based on input signal |
| information. |
STD | Sets the standard dynamic range |
| recommended for regular home use. |
Max | Outputs sound without adjusting the |
| dynamic range of the input signals. |
■2 Lipsync
Adjusts delay between video output and audio output.
HDMI Auto
Choices: Off*/On
Automatically adjusts output timing of audio and video signals when a monitor that supports an automatic lip- sync function is connected to this unit.
Off | Select this when the connected monitor does |
| not support the automatic |
| you do not use the automatic |
| Set the correction time in “Manual Delay.” |
On | Select this when the connected monitor |
| supports the automatic |
| adjust the correction time in “Auto Delay.” |
OPERATION | ADVANCED |
|
|
English