CONNECTION/INITIAL SETTINGS

Installation and Connection

To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound beams (p. 11). Depending on your installation environment, connections with external components (p. 14) should be done before installation.

Notes on installation

Make sure you leave an adequate amount of ventilation space so that heat can escape.

Be sure to install this unit where it will not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

When using a cathode-ray tube (CRT) TV, do not install this unit directly above your TV.

If the picture on your TV screen becomes blurred or distorted, we recommend moving this unit away from your TV.

 

 

 

 

 

 

 

 

Some of your TV have sensors such as motion sensor, or signal

 

 

 

 

 

 

 

 

transmitter for 3D glasses in front. Installing the center unit may

 

 

 

 

 

 

 

 

interrupts the sensors or signal transmitter functioning. Set the

 

 

 

 

 

 

 

 

center unit away from your TV, or install it in your rack.

Center unit

 

 

 

 

Center unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Install this unit in the center of the left and right walls.

 

 

 

 

 

 

Subwoofer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Listening position (such as sofa, etc.) should be located at the front of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the unit.

 

 

 

 

 

 

 

 

• The distance between listening position and the unit should be more

 

 

 

 

 

 

 

 

than 1.8 m (5.9 ft).

 

 

 

 

 

 

 

 

Subwoofer

 

 

 

 

 

 

 

 

Install the subwoofer as close to the center unit as possible for a

 

 

 

 

 

 

 

 

better unit of sounds.

Before installing this unit

This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects produced by this unit may not be sufficient when this unit is installed in the following locations.

Rooms with walls inadequate for reflecting sound beams

Rooms with acoustically absorbent walls

Rooms with measurements outside the following range: W (3 to 7 m (10 to 23 ft)) × H (2 to 3.5 m (7 to 11.5 ft)) × D (3 to 7 m (10 to 23 ft))

Rooms with less than 1.8 m (6 ft) from the listening position to this unit

Rooms where objects such as furniture are likely to obstruct the path of sound beams

Rooms where the listening position is close to the walls

Rooms where the listening position is not in front of this unit

My Surround

In the room such as above, you can enjoy rich surround effects by My Surround (p. 29, 30).

PREPARATION

 

SETTINGS INITIAL

CONNECTION/

PLAYBACK

SETTINGS

TROUBLESHOOTING

APPENDIX

9 En