Playback features

Playing back Bluetooth components

Play back music stored in the Bluetooth components (portable audio players, Bluetooth-enabled computers, etc.) connected to the Bluetooth Wireless Audio Receiver (optional YBA-10).

Pairing

About “Pairing”

It is the operation of registering a component for communications. Pairing must be performed before using a Bluetooth component with the Yamaha Bluetooth Wireless Audio Receiver connected to the system for the first time, or if the registered pairing data has been deleted.

To ensure security, a time limit of 8 minutes is set for the pairing operation. Please read and fully understand all the instructions before starting.

1 As described in step 1 (☞p. 33) of “Playing back iPod/iPhone”, connect the Bluetooth Wireless Audio Receiver (optional YBA-10) to DOCK terminal. 4)

2 PressDOCK. DOCK key to set the input to

3 Turn on the Bluetooth component you want to pair with, and then enter pairing state. 5)

4 Press OPTION key.

Option menu for DOCK input appears in the display.

5 Select “Pairing” by pressing U/ V key and press ENTER key. 6)

“Searching...” appears on the display when the Bluetooth connection is initiated.

6 Check that the Bluetooth components recognize the Bluetooth Wireless Audio Receiver.

If the Bluetooth component detects the Yamaha Bluetooth wireless audio receiver, the audio receiver name (“YBA-10 YAMAHA”, for example) appears in the device list of the Bluetooth component.

7 Select the Bluetooth Wireless Audio Receiver from the component list of the Bluetooth components and input “0000” for password of the Bluetooth.

Connecting 7)

1 PressDOCK. DOCK key to set the input to

2 Press OPTION key.

3 Select “Connect” and press ENTER key. 8)

4 To disconnect the Bluetooth Wireless Audio Receiver from the Bluetooth component, press OPTION key again to display option menu, select “Disconnect”, and press ENTER key.

PREPARATION

 

SETTINGS INITIAL

CONNECTION/

PLAYBACK

SETTINGS

TROUBLESHOOTING

APPENDIX

4)y

For details, refer to the manual supplied with YBA-10.

5)y

Refer to the manual of your Bluetooth component for details.

6)y

To cancel pairing, press RETURN key.

7)y

When establishing the Bluetooth connection from this unit, it is only possible to connect to the most recently connected Bluetooth component.

8)y

•For details of messages, refer to “Bluetooth (☞p. 49)” in “Troubleshooting”.

•If you want to establish a connection with a Bluetooth other than the one most recently connected, initiate the connection from that Bluetooth component. Refer to the manual of your Bluetooth component for details.

35 En