Using the supplied demonstration DVD

By playing back the supplied demonstration DVD, you can check the digital signals being input properly from the Blu-ray disc player through the digital connection (HDMI, optical, or coaxial) and experience this unit’s multi-channel surround sound.

Playing back the demonstration DVD

1 Select input sources both on this unit and your TV so that audio signal of DVD is input to this unit and video signal is input to your TV.

HDMI connection: On your TV, select this unit as the input source. On this unit, select the Blu-ray disc player as the input source.

Audio/Video connection: Select the Blu-ray disc player as the input source on both of your TV and this unit.

2 Load the demonstration DVD.3 Select “Rain and Thunder” from the DVD menu.

Display the DVD menu screen by using the remote control of the Blu-ray disc player and then playback “Rain and Thunder”.

4 Press OPTION key on the remote control to display the option menu.5 Press U/V key to select “Signal Info”, and then press ENTER key.6 Check that “Dolby D” appears in the front panel display.

If “Dolby D” does not appear

If “Dolby D” does not appear in the front panel display in step 6, check the followings.

Is the Blu-ray disc player connected to this unit using a digital cable?

You need to connect these components with digital cables (HDMI cable, optical cable, or coaxial cable) to playback 5.1- channel contents such as Dolby Digital.

Is an input source selected correctly on this unit?

Check that which input jack of this unit the Blu-ray disc player is connected to. Then check whether the name of input source displayed in the front panel display of this unit is the same as that of the input jack used.

y

If you connect the Blu-ray disc player to the HDMI IN 1 jack, when you select HDMI 1 as the input source, “HDMI 1” should be displayed.

Is digital audio output set correctly on the Blu-ray disc player?

HDMI connection: Set the digital audio output setting to “Auto” or “Bitstream”.

Digital audio connection: Enable “Dolby Digital/DTS” or “Bitstream”.

y

Refer to the owner’s manual supplied with the Blu-ray disc player for the settings.

Dolby D

If the “Dolby D” does not appear, the digital audio signal of the demonstration DVD is not input to this unit. Check the connections and settings of the Blu-ray disc player.

7 Press V key and check that “3/2/0.1” appears in the front panel display.

3/2/0.1

Note

“Dolby D” does not appear when the Blu-ray disc player is not playing back the demonstration DVD and the DVD menu screen is displayed.

8 Experience the Dolby Digital 5.1ch surround sound.

The sound of rain and buzzing of cicadas are heard from all around the listening position.

y

Enjoy the surround sound in surround playback mode (☞p. 27).

54 En