Initial settings
Saving several measurement results (Memory setting function)
You can save the current beam and sound settings in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment. For example, if there are curtains in the path of sound beams, the effectiveness of the sound beams will vary depending on whether the curtains are open or closed.
If there are curtains in your listening room, we recommend following the procedure below.
1. While the curtains are open, run “BEAM+SOUND OPTIMIZE” (☞p. 20) and then save the settings to “Memory 1”.
2. While the curtains are closed, run “SOUND OPTIMIZE ONLY” (☞p. 20) and then save the settings to “Memory 2”.
■ Saving settings
|
|
|
|
1 | Press | SETUP key. |
|
2 | Select “MEMORY” and press | ENTER | |
key. |
|
| |
3 | Press | U / V key to select “SAVE” | |
and then press ENTER key. |
| ||
| Press | U / V key to select the desired | |
4 memory number and then press | ENTER | ||
key. 1)
Selectable item: Memory 1, Memory 2, Memory 3
“Memory 1 Save Now ?” is displayed when the memory number is selected.
5 Press 
ENTER key.
“Memory 1 Saving…” is displayed and the setting is saved.
1)y
•If system settings are already stored in the selected memory number, this unit overwrites the old settings.
•Memory function cannot be set when “MEMORY PROTECT” is set to “ON” in ADVANCED SETUP (☞p. 45).