Yamaha YSP-2200BL Advanced setup, 45 En, 3 Release INPUT key on the front panel, 5 Change setting by pressing Y/Z key. 2), 2 While holding down INPUT key on the front

Advanced setup

1 Press key to turn this unit to standby mode.2 While holding down INPUT key on the frontpanel, press key on the remote control to turn on the power.

“ADVANCED SETUP” appears in the front panel display.

3 Release INPUT key on the front panel.

4 Press U/ V to select the desired menu on the front panel display and then press ENTER key. 1)

5 Change setting by pressing Y/Z key. 2)6 Press key to set this unit to the standby mode.

The new setting will be reflected when you turn on the

unit by pressing key.

PREPARATION
SETTINGS INITIAL	CONNECTION/

Menu	Description	Selectable item/Adjustable range

TURN ON VOLUME	Sets volume level at power-on.	Off* (Not set), 01 to 99, MAX (Maximum)

MAX VOLUME SET	Sets maximum volume.	01 to 99, MAX* (Maximum)

PANEL INP. KEY	Enables/disables the INPUT key on the front panel.	P.INPUT: ON* (Enabled), P.INPUT:OFF (Disabled)

F.PANEL. KEY	Enables/disables the keys on the front panel.	P.INPUT: ON* (Enabled), P.INPUT:OFF (Disabled)

R.INPUT POWER	Enables/disables power-on by remote control input	R.INPUT PW: OFF* (Disables power-on),
	keys when the unit is in standby mode.	R.INPUT PW: ON (Enables power-on)

AC ON STANDBY	Sets whether or not this unit returns to its previous	AC STANDBY: OFF* (Restores the state before
	state when AC power is restored after a temporary	power was lost),
	power loss.	AC STANDBY: ON (Enters standby mode)

MEMORY PROTECT	Prohibits saving of the settings by using the memory	PROTECT:OFF* (Protect is not performed),
	setting function (☞p. 22).	PROTECT:ON (Protect is performed)

DEMO MODE	Demonstrates sound beam. 3)	BEAM DEMO:OFF* (Normal playback),
		BEAM DEMO:ON (Demo mode)

FACTORY PRESET	Resets all settings to their default values.	PRST:CANCEL* (Reset is not performed),
		PRST: RESET (Reset is performed)

PLAYBACK

SETTINGS

TROUBLESHOOTING

1)y

To return to the previous menu, press RETURN key.

2)y

The default settings are marked with “*”.

3)y

This unit outputs sound beam down-mixed to 1 channel moving horizontally to right and left. By this function, you can feel how sound beam is output from this unit.

“Demo” appears in the front panel display while setting demo mode.

Start/stop moving horizontally

Press Off key.

Auto Demo On: Sound beam automatically moves horizontally to right and left

Auto Demo Off: The direction of sound beam is fixed

Adjust the angle of sound beam manually

Press SURROUND/ STEREO key in the state of “Auto Demo Off”

APPENDIX