Playback features

Option menu items

The following menu items are provided for each input.

Input source

Menu items

 

 

HDMI1-3

Volume Trim, Decoder Mode, Sur. Dec. Mode,

 

Signal Info

TV

 

 

 

INPUT1-3

 

 

 

DOCK

Volume Trim, Sur. Dec. Mode, Connect,

Disconnect, Pairing, Interlock 3)

 

The option menu items are listed below. These settings are applied to the currently selected input source. The default settings are marked with “*”.

■Displaying the input signal information (Signal Info)

Press U/ V key to change the following information.

Format

Digital audio format

 

 

Channel

The number of channels included in input signal

 

(front/surround/LFE (low frequency sound

 

effects))

 

Display example: [3/2/0.1]  Front 3ch,

 

Surround 2ch, LFE for input signal 4)

Sampling

Sampling frequency for digital input signal

 

 

Bitrate

Bitrate per second of input signal

 

 

HDMI In

HDMI video signal resolution

 

 

HDMI Message

When error occurs with HDMI (displayed only

 

when error is occurred.)

 

 

PREPARATION

 

SETTINGSINITIAL

CONNECTION/

■Adjusting input level of each jack (Volume Trim)

Adjust the input level for each jack to compensate for variations in volume between different input devices.

Adjustable range: -6.0 dB to 0.0 dB* to +6.0 dB

■Switching the audio signal to play back (Decoder Mode)

Use to select digital audio signals for playback.

Selectable item: Auto*, DTS

Auto: This unit automatically selects the audio signal for playback. Normally select this mode.

DTS: This unit plays back only DTS signal.

■Setting the surround decoder (Sur. Dec. Mode)

Refer to “Enjoying sound with your preference” (☞p. 27) for details.

Playing back iPod/iPhone

You can play music stored in iPod/iPhone connected to Yamaha Universal Dock for iPod (optional YDS-12, etc.) or Wireless System for iPod/iPhone (optional YID-W10).

1 Insert the iPod/iPhone into the Yamaha Universal Dock for iPod or Wireless System for iPod/iPhone connected to the DOCK terminal. 5)

To VIDEO INPUT of TV 6) (only when YDS-12/YDS-11/ YDS-10 is used)

PLAYBACK

SETTINGS

YDS-12, etc.

Place it as far as possible from this unit to avoid the noise.

2 Playback iPod/iPhone by selecting dock input by pressing DOCK key. 7)

4) y

6) y

TROUBLESHOOTING

APPENDIX

If the input signal includes channels that cannot be displayed in the format shown in the display example, the total number of channels will be displayed, as in “5.1ch”.

5)y

•Connect when this unit is in standby mode.

•For details on how to connect and set up the YDS-12 and YID-W10, refer to manuals supplied with them.

•Remove the cable from the unit pushing the projection on the upper of the plug.

When using YDS-12, YDS-11, or YDS-10 with the video pin cable (supplied) to connect the VIDEO OUT jack of this unit to the VIDEO INPUT jack of the TV, you can display iPod/iPhone video on the TV.

7) Notes

•Some features may not be available depending on the model or the software version of your iPod/iPhone.

•For details about the messages displayed on the front panel display of connected iPod/iPhone, refer to “iPod/iPhone (☞p. 48)” in “Troubleshooting”.

•Be sure to set the volume to minimum before docking or removing your iPod/iPhone.

33 En