York YK-ZCU2x0-0, YK-ZCU4x0-0, YKSMU2x0-0 - page 29

System Manager/Zone Coordinator User’s Manual 29

428516-YUM-B-0908

5. To disable password security when the password requirement is currently

enabled, press OK.

To enable password security when the password requirement is currently

disabled, press OK.

The Security/Password Setup screen returns, indicating the password security

change you made.

Enabling (or Disabling) the Remote User Interface

To enable (or disable) the remote user interface:

Note: This function is only available at the System Manager (or Coordinator).

You cannot perform this procedure from the remote user interface.

1. From the Home screen, press the Setup icon. The System Manager Setup or

Coordinator Setup and Status screen appears.

2. For a System Manager, press the System Manager button. The System

Manager Setup screen appears.

For a Coordinator, press the Coordinator button. The Coordinator Setup screen

appears.

3. Press the Security (password) button. The Security/Password Setup screen

appears.

4. Press the Remote User Interface button. The Remote User Interface screen

appears.

Figure 15: Remote User Interface Screen

CancelOK

Remote User Interface

FIG:RmtUsrIntrfc

Curent Value:

Enabled

New Value:

Disabled

Contents

Main TABLE OF CONTENTS System Manager/Zone Coordinator Users Manual Page Page Page System Manager/Zone Coordinator Users Manual Document Introduction Related Documentation System Manager/Zone Coordinator on the Network Figure 1: Example of YCCS Network with System Manager and Zone Coordinators System Configuration User Interface Overview System Startup System Manager/Zone Coordinator Users Manual 9 428516-YUM-B-0908 System Manager/Coordinator Menu Structure Figure 2: Local Controller Display Menu Structure Screen Layout Figure 3: System Manager Basic Screen Layout Main Selection Bar Table 2: Icons on Main Selection Bar Button Description Page Enter Password Screen | * * * * Figure 4: Operator Password Entry Screen Table 3: Three User Password Levels Level Description Home Screens Display and Navigation Screens YK-SMU-0 - Setup System Manager/Zone Coordinator Users Manual 15 Data Entry Screens Table 7: Buttons Available on Navigation Area of Data Entry Screens Button Description Schedule 1 - Mon - Occ upancy Time 1 Figure 7: Example of a Data Entry Screen (Occupancy Time 1 Screen) Remote User Interface Alarms and Alarm Priorities Alarm Destinations Zones, Groups, and Members Event Scheduling Global and Instant Shutdown Trend Data Collection Display Units Maintenance Procedures Detailed Procedures Basic Procedures Page Setup Procedures Figure 11: Setup Options - Menu Structure Page Page Page Page Modem Setup Page Figure 17: Ethernet Setup Screen Table 11: Ethernet Parameters Parameter Parameter Range/Selections Ethernet Setup Page + Page Page Scheduling Procedures Figure 22: Schedule Options - Menu Structures Schedule 1 - Daily Schedules Schedule 1 Schedule - Mon Schedule 1 - Daily Schedules Select New Member for Schedule 1 Schedule 1 Member List Page Page Page Page Alarm Procedures Page Page Page 3. Press the Text Message Destination button. The Text Message Setup screen appears. Figure 34: Text Message Setup Screen Table 14: Text Message Setup Parameters (Part 1 of 2) Parameter Parameter Range/Selections Email Setup Page Page YK-SMU-10 - Alarms Page Summary Procedures YK-SMU-10 - Summary Page Zone Setup Procedures Figure 41: Zone Setup Options - Menu Structure Page Page Page Setting up a VAV RTU Zone Figure 44: VAV RTU Zone Setup Screen VAV 24 - Zone Setup Page Page Page Page Page Page Zoning System Setup Procedures Figure 50: Zoning System Setup Options - Menu Structure YK-ZCU - Zoning System Setup Page Viewing Zoning System Status Figure 52: Zoning System Status Screen for CV/COB RTU YK-ZCU - Zoning System Status Page Page Auxiliary Points Setup Procedures Page Page Page Page Page Dial-up Communication Procedures Page Page Page Page Page Page Maintenance Procedures